Existing circuits assessed first
We check the installation before specifying a board and its protection.
Residential Electrical
NICEIC Approved Contractor. Modern RCD, RCBO and surge protection options. Future loads considered.
Modern circuit protection, careful testing and future load planning turn an old fuse board into a practical upgrade.
We check the installation before specifying a board and its protection.
Suitable circuit protection can limit disruption when one circuit develops a fault.
We consider likely charging and renewable equipment before the upgrade.
An old fuse board may have limited protection, signs of wear or too little capacity for the circuits you now use. We assess the existing supply, earthing, bonding and circuit condition before recommending a replacement. Modern RCDs and RCBOs disconnect faulty circuits quickly, while individual circuit protection can reduce the amount of the property affected by one fault. Surge protection can also help shield connected equipment from sudden voltage spikes.
A fuse box upgrade should account for more than today's socket and lighting circuits. We consider likely additions such as solar panels, battery storage and EV charging so the arrangement is not boxed in from the start. Commercial premises may need a distribution-board upgrade or relocation, which brings different load and access requirements. The work involves planned power isolation, circuit identification and testing. We then issue the relevant certification for the completed installation.
Frequently Asked Questions
Related
Residential ElectricalNew circuits, sockets, lighting and smart controls planned around real loads, safe routes and the home's future use.
View service
Residential ElectricalTest-led rewiring replaces what is needed, plans each room properly and leaves documented circuits for future use.
View service
Residential ElectricalPower your garage or outbuilding with circuits sized for real loads, sensible cable routes and future equipment.
View serviceNext step
Call us to arrange an assessment of the board, circuits and any future electrical additions.